Hand Held Products 7200/UG - Manual (Page 49)

C H A P T E R 3 D O L P H I N 7 2 0 0 R F H A N D H E L D C O M P U T E R
49 49 49 49
Example 4: To display the radio’s WEP settings, enter
C:\>WEP STATUS
Result: The terminal will displays the settings as shown below:
WEP128 encryption
Key 1 Len:13
Key 2 Len:13
Key 3 Len:13
Key 4 Len:13
key index is 1
(i.e. the active key)
Note: The first line indicates the capability of the radio; not the encryption level.
Example 5: To select the key to be used during operation with the access point,
enter
C:\>WEP SELECTKEY 2
Result: The terminal will display the following:
Setting transmit key index to 2.
Key2 Selected.
Example 6: To clear the active key, enter
C:\>WEP CLEARKEY 2
Result: The terminal will display the following:
Clearing DefaultKey 2.
Key2 Cleared.
Example 7: To enable the WEP WEPSHARED mode, enter
C:\>WEP WEPSHARED
Result: Sets the AuthType parameter in the cscpkt.ini file to “WEPSHARED”. The
terminal will displays the following:
WEP mode WEPSHARED