Hand Held Products 7200/UG User Manual
Page 99
C H A P T E R 7 U S I N G T H E D O L P H I N 7 2 0 0 H O M E B A S E
99
99
99
99
Figure 14 Inserting the Dolphin terminal into the HomeBase
Charging an Additional NiMH Battery Pack
1.
Insert an NiMH battery pack with the battery contacts pointing upward into the
Dolphin HomeBase auxiliary battery well.
Figure 15 Rear View Dolphin HomeBase
Once the battery is inserted into the Dolphin HomeBase you can use the
CHARGING AUXBATT LED to monitor the charging progress. See Figure 10 for a
summary of each charging state.
Deep-cycling the Battery
For maximum battery life, Hand Held Products recommends that you deep- cycle
(service) the battery twice before initial use and then, once a month thereafter. To
deep-cycle, insert the battery into the HomeBase auxiliary battery well. Then, push and
hold the Service Aux Batt button for at least 4 seconds. The deep-cycling process
takes approximately 6.5 hours.
Charging MAIN
BATT LED
Charging AUX
BATT LED
Laser Engine
Window
Auxiliary Battery
Well