Hand Held Products 7200/UG - Manual (Page 23)

C H A P T E R 2 D O L P H I N B A S I C S
23 23 23 23
System Features
CPU
The Dolphin’s computing power is provided by a highly integrated AMD ELAN
SC310 386SX 33 MHz microprocessor.
Disk Drives
The Dolphin contains two disk drives that provide storage for system files,
applications, and data. A third drive is also present if you purchase the FLASH
expansion option.
Drive A
Drive A contains 256K executable FLASH EEPROM to store system utilities and to
initialize the boot process. This drive is read-only and is not usable by the
developer/end-user.
Drive C
Drive C is a 2MB or 8MB FLASH virtual hard drive used for program and data
storage.
Drive D
If you add the expanded memory module to your Dolphin Batch terminal, it will
appear as Drive D. Up to 8MB of additional FLASH memory can be added via the
FLASH expansion module. Note: This option is not available for the Dolphin RF.
Front Panel Physical Features
This section describes features on the Dolphin’s front panel. The alphanumeric and
numeric Dolphins have identical back panels.
Light Emitting Diodes (LED)
The red LED located at the upper right corner of the LCD display is labeled ‘SCAN’.
This LED illuminates when the user presses the ON/KEY key and activates the scan
engine.
The green LED located at the upper left corner of the LCD display is labeled
‘DECODE.’ This LED illuminates when the bar code software successfully decodes a
bar code. Both LEDs are software programmable.
N O T E
Drive B is an image of
the A drive and not a
physical drive.