Hand Held Products 7200/UG - Manual (Page 83)

C H A P T E R 6 D O L P H I N 7 2 0 0 2 D H A N D H E L D C O M P U T E R
83 83 83 83
Reading Barcodes
The omni-directional scanning capabilities of the Dolphin 7200 2D terminal greatly
simplify operation and training and increase productivity. To read a bar code:
1. Press the ON/SCAN button to project the scanner’s bright red aiming beam
2. Center the aiming beam over the barcode. The red SCAN LED illuminates
when the user presses the ON/KEY key and the green DECODE LED
illuminates when a bar code is successfully decoded. The aiming beam can
be positioned in any direction for a good read.
Linear bar code 2D Matrix symbol
The aiming beam is smaller when the terminal is held closer to the code and larger
when it is farther from the code. Symbologies with smaller bars or elements (mil size)
should be read closer to the unit. Symbologies with larger bars or elements (mil size)
should be read farther from the unit.