Hand Held Products 7200/UG - Manual (Page 79)

C H A P T E R 5 D O L P H I N 7 2 0 0 W I T H I M A G E - C A P T U R E
H A N D H E L D C O M P U T E R
79 79 79 79
Press ENTER and the terminal will beep to indicate that you have successfully
entered the tracking number.
2. The screen shown below will appear. Press and hold the ON/SCAN key to take
an image or signature. Release the ON/SCAN key when the desired image is
displayed on the Dolphin terminal’s screen. The terminal will beep, the screen will
go blank momentarily and the image taken will appear on the screen. If the image
is acceptable, press the ENTER key to save the image and proceed to the next
step. If the image is not satisfactory, press the ON/SCAN key to take a new
image. Repeat as necessary to acquire the desired image and proceed to the next
step.
Scan Screen
3. After you have saved the image, the following screen will appear on the Dolphin
display:
Saving Image Screen