Hansol Multitech Uromat 3000 - Manual (Page 2)

0116 7201 -2 of 90 - 06/00
Rev. 00 © 2000 Hans Pausch Röntgengerätebau Graf-Zeppelin-Str. 1 D-91056 Erlangen ALL RIGHTS RESERVED Ru
CONTENTS Page
1. Technical Data
1.1 General Safety Information 4
1.2 Component Weights 4
1.3 Component Dimensions 4
1.4 Packaging Dimensions and Weights 4
1.5 Component Designations 5
1.6 Dimensional Drawing 6
1.7 Cable Lengths of the High Voltage, Collimator,
Adjustable Bucky and Image lntensifier Cables 10
1.8 Power Line Connection Data 11
1.9 Required Special Tools 11
1.10 Required Test Equipment 11
1.11 Environmental Conditions 11
1.12
Operating Conditions 11
1.13 Circuit Diagram Overview 12
1.14 Component Designations for the Circuit Diagram 27
1.15 Function Description of the Controller 31
2. Installation
2.1 Preparations for Installation 35
2.2 Unpacking the Unit Parts 35
2.3 Taking the Unit Off the Pallet 36
2.4 Installing the Unit 37
2.5 Aligning the Unit 38
2.6 Temporarily Connecting Line Power 39
2.7 Installing the Tube Unit Support Arm 39
2.8 Preinstallation of the Tube Unit - Collimator 40
2.9 Installing the Tube Unit - Collimator on the Tube
Unit Support Arm 40
2.10 Installing the Image Intensifier (I.I.) 41
2.11 Laying the Collimator Cables 41
2.12 Laying the High Voltage Cables 42
2.13 Laying the I.I. Cables 44
2.14 Connecting the Power Supply via the Generator 44
2.15 Installing the Measuring Chamber 45
2.16 Installing the Grid 46
2.17 Installing the Tilt Angle Indicator - Error Display 46
2.18 Installing the Cover Panels 47
2.19 Installing the Monitor Support Arm 47
2.20 Installing the Holder for the Flush Bowl 47
2.21 Sealing the Table Frame Cover Panel 48