Hansol Multitech Uromat 3000 - Manual (Page 58)

0116 7201 -58 of 90 - 06/00
Rev. 00 © 2000 Hans Pausch Röntgengerätebau Graf-Zeppelin-Str. 1 D-91056 Erlangen ALL RIGHTS RESERVED Ru
Fig.73 Fig. 74
3.22 Cassette Carriage Drive Belt Tension
Move the tabletop max. forward and take off the cover panel (Fig. 74/Pos. 1) after removing
the 5 mounting screws.
Belt tension should be determined as follows:
The spring balance should be placed centered between the motor-side drive pulley (Fig.
75/Pos. 3) and the belt return pulley (Pos. 2) to achieve a deflection of 1 cm when a force of
25 N is applied. Adjustment can be made by means of the tension screw (Pos. 4) after
loosening the 4 mounting screws (Pos. 5).
Fig.75 Fig. 76