Hansol Multitech Uromat 3000 - Manual (Page 79)

06/00 - 79 of 90 - 0116 7201
Rev. 00 © 2000 Hans Pausch Röntgengerätebau Graf-Zeppelin-Str. 1 D-91056 Erlangen ALL RIGHTS RESERVED Ru
4.4 Spare Parts List
Note:
If there is a failure, components may only be replaced with the listed original parts. When
ordering spare parts, always list the complete production number of the unit, the designation
and the order number of the part.
Replacement of components or assemblies may only be done by us or by offices that have
express authorization from us to do this. See also the chapter "Safety-technical Remarks".
Pos. Designation Part No.:
1 Electronics panel, complete 0116 2000
2 CPU board 0116 2020
3 Breaker assembly 0116 2025
4 Power supply 0116 2030
5 CPU 0116 2021
6 Frequency converter, three-phase 0006 0774a
7
8 Back wall 0116 0310
9 Service door 0116 0306
10 Potentiometer, 10K, 10-turn 0006 0251b
11 Microswitch 0006 0184
12
13 Spindle unit, installed 0116 0150
14
15 Bearing stud, centered 0116 0421
16 Roller bearing 0005 0161i
17
18 Bearing stud, centered 0116 0426
19 Roller bearing 0005 0161a
20
21 Bearing stud, eccentric 0116 0431
22 Roller bearing 0005 0161a
23
24 Complete shaft 0005 0145f
25
26
27 Front cover panel 0116 0303
28
29 Roll bar 80 pcs. 0116 0333a
30 Roll bar 4 pcs. 0116 0333b
31
32 Front cover panel 0116 0304
33
34 Lift/tilt drive, compl. 0116 0185a
35 Lift/tilt drive, compl. 0116 0185b
36 HTD toothed belt 2 pcs. 0005 0243l
37
38 Microswitch, complete 0116 0170
39
40 Potentiometer, complete 0116 0171
41 Synchroflex toothed belt 0005 0170i
42