Removing and installing covers, Removing the cover – Hitachi 8450H/R User Manual
Page 43
Ch 3: Installing Optional Devices
Hitachi PC VisionBase 8450H/R Server
39
The following table shows SCSI devices installable for each extended storage bay.
Legend: Y: Installable, N: Not installable
Removing and Installing Covers
Before installing optional devices to the system equipment, open the front door, then remove the outer covers from
the system equipment. When you completed installation of option devices, attach the covers again.
Removing the Cover
Before installing a SCSI device or an extended board within the system equipment, you need to remove the upper
and side covers and panel cover in the following steps.
Part name
Usable extended storage bay
1
2
3
4
5
6
7
8
9
Internal hard disk (9GB)
1
1 Installable as a data disk, a reserve disk, or a replacement disk for a disk array.
Y
Y
Y
Y
Y
Y
-
-
-
Internal hard disk (18GB)
1
Y
Y
Y
Y
Y
Y
-
-
-
Internal CD-ROM (standard)
-
-
-
-
-
-
Y
Y
N
Internal DAT (optional)
-
-
-
-
-
-
N
Y
Y
Internal DAT changer
2
(optional)
2 Occupies two extended storage bays.
-
-
-
-
-
-
N
Y
Internal DLT
2
(optional)
-
-
-
-
-
-
N
Y
Be careful of electric shock. Before opening the cover, unplug the power cord.
Do not use the system equipment with its covers removed or with the storage bay door open, because
electric shock or a failure might occur.
Storage bay door
Right side cover
Left side cover
Front cover
Panel cover