Hitachi 8450H/R - Manual (Page 98)

Ch 3: Installing Optional Devices
94 Hitachi PC VisionBase 8450H/R Server
Installing ISA Boards
Extended boards conforming to the ISA specification are as follows:
•
Communication board (optional)
•
ISDN board set (optional)
Installing ISA boards
1. Remove two mounting screws from the brace at the back of the system equipment, then pull the master board
bracket to the front until it stops.
2. Remove the mounting screws from the memory bracket, then extract the bracket by pulling it to the front.
3. Remove the mounting screws, then the slot cover.
NOTE: Store the removed slot covers properly.
Memory bracket
Master board bracket
1
1
2
Slot bracket
Slot cover
Slot guide