Hitachi 8450H/R - Manual (Page 52)

Ch 3: Installing Optional Devices
48 Hitachi PC VisionBase 8450H/R Server
Installing SCSI Devices
This section explains how to install SCSI devices (including internal hard disks, internal CD-ROMs, and
internal DATs).
Basics on SCSI Devices
This section explains basic knowledge required for installing SCSI devices.
Outline of Operation
Installation of SCSI devices can largely be divided into the following four steps:
Before changing the configuration of the system equipment (such as internal SCSI devices or extended
boards), be sure to unplug the power cord, and wait at least 30 seconds. In some rare cases, the setup
data might be changed. In such cases, turn off the system equipment, turn it on, then change the
settings on the Setup Menu.
Install a SCSI board in the system equipment.
Set a SCSI ID and attach a terminating resistor for the SCSI device.
Install the SCSI device in the system equipment.
Connect the SCSI board with the SCSI device using a cable.