Hitachi 8450H/R - Manual (Page 79)

Ch 3: Installing Optional Devices
Hitachi PC VisionBase 8450H/R Server 75
6. Install the device bracket onto the system equipment, then fix it with two mounting screws. While installing,
insert the claw of the device bracket into the guide hole on the system equipment.
The next step is connecting cables. See “Connecting Cables” on page 78.
Installing an Internal DLT (Optional)
This section explains how to install an internal DLT onto extended storage bays. The height of the internal DLT is
approximately twice the height of one extended storage bay, so use extended storage bays 8 and 9.
NOTE: This section explains internal DLT. The same applies to internal DLT.
In internal DLT, a wide 68-pin type is used.
Use extreme care to protect internal hard disks from shock (hitting or falling on hard material).
Being precision devices, internal hard disks are very susceptible to shock.
Guide hole
Claw
SCSI connector
Short bar
Power connector