Hitachi 8450H/R - Manual (Page 46)

Ch 3: Installing Optional Devices
42 Hitachi PC VisionBase 8450H/R Server
Removing the Side Covers
When installing a SCSI device into external storage bays 7 to 9, remove the right side cover.
When installing a processor, a memory DIMM, or an extended board, remove the left side cover.
NOTE: The right and left side covers should be removed basically in the same way. This section explains only the
left side cover.
1. Remove two mounting screws from the back of the system equipment.
2. Holding the center of the left side cover, pull the cover to the rear several centimeters, then extract it to the
outside.
2
1