Hitachi 8450H/R User Manual
Page 99
Ch 3: Installing Optional Devices
Hitachi PC VisionBase 8450H/R Server
95
4.
Aligning the connector side with the slot and the left end of the board with the slot guide, and holding both ends
of the board, push in the board.
NOTE: You need not align a half size board with the slot guide.
5.
Fix the slot bracket with two mounting screws. Mounting screws must be installed in expansion slot (PCI) 1 and
expansion slot (ISA) 1.
6.
Insert the claw of the memory bracket into the guide holes on the system equipment, then fix it with mounting
screws.
7.
Pull the master board bracket to the back, then fix it with two mounting screws.
Removing ISA boards
Remove ISA boards in the reverse procedure to their installation.
4
5
6
6
5
Memory bracket
Guide hole
Master board bracket