Hitachi 8450H/R - Manual (Page 49)

Ch 3: Installing Optional Devices
Hitachi PC VisionBase 8450H/R Server 45
Installing the Side Covers
Before installing the side covers, check that no part of a cable is coming out. If you install covers with a cable coming
out, that cable might be disconnected.
NOTE: The right and left side covers should be installed basically in the same way. This section explains only the
left side cover.
1. Fit the claws on the upper and lower portions of the left side cover into the guide holes on the system equipment,
then push in the cover while holding the center of the cover.
2. Fix the cover with two mounting screws.
1
2
Claw
Guide hole