Hitachi 8450H/R - Manual (Page 66)

Ch 3: Installing Optional Devices
62 Hitachi PC VisionBase 8450H/R Server
Installing a SCSI Device
This section explains how to set SCSI IDs and how to install an extended storage bay.
Installing Locations for SCSI Devices
Internal SCSI devices (including internal hard disks and removable devices such as internal CD-ROMs) must be
installed onto extended storage bays of the system equipment.
Usable extended storage bays depend on the SCSI device to be installed. Referring to “Extended Storage Bays” on
page 38, check the installing positions.
Boards and internal SCSI devices are interconnected in the following way:
Expansion slot 4:
Disk array controller board
Internal SCSI cable
Internal SCSI cable (standard):
50-pin narrow cable for
removable devices
Extended storage bays 7 to 9:
Removable devices
Extended storage bays 1 to 6:
Hard disks
Internal SCSI cable
(standard)