HP 8100C - Manual (Page 26)

Step 2 Choose a destination 25
4 Repeat steps 2 and 3 to add more fax destinations.
Note To view the list, press T AB and use the and keys to scroll the
destinations. To remove a destination, select it and press B ACKSPACE .
5 The Paper Size and Format settings appear in the upper right
corner of the display. To change these settings, see
“Changing
settings (optional)” on page 28 .
6 Press to begin sending the document.
● If you sent a single-sided document using the ADF, the
process is finished.
● If you sent a double-sided document using the ADF, wait for
the first side to finish. Then, reload the document with the
second side facing up, last page on top, and press
again.
● If you used the glass, remove the page when it is finished.
Then, place the next page face down on the glass and press
. After the last page, press S END ( F4 ).
If fax destinations are busy, the numbers are retried as many times as
the Internet fax service specifies.
Note The digital sender does not notify you if you sent to an invalid fax
destination.