Henny Penny EVOLUTION ELITE EEG-141 User Manual
Page 13
Model EEG-141, 142, 143, 144
SECTION 2. INSTALLATION
This section provides the installation and unpacking instructions for
the Henny Penny Evolution Elite fryer.
Installation of this unit should be performed only by a qualified
service technician.
Do not puncture the fryer with any objects such as drills
or screws as component damage or electrical shock
could result.
Any shipping damage should be noted in the presence of the
delivery agent and signed prior to his or her departure.
1.
Cut and remove the metal bands from the carton.
2.
Remove the carton lid and lift the main carton off the fryer.
3.
Remove corner packing supports (4).
4.
Cut the stretch film from around the carrier/rack box and
remove it from the top of the fryer lid.
5.
Cut and remove the metal bands holding the fryer to the
pallet, and remove fryer from pallet.
Remove filter drain pan and JIB shelf from fryer before
removing fryer from pallet or damage to the unit could
result. Figure 1.
Take care when moving the fryer to prevent personal
injury. The fryer weighs approximately 600 lbs.
(272 kg) to 800 lbs. (363 kg).
2-1. INTRODUCTION
2-2. UNPACKING
609
2-1
Figure 1
Z
2
1
4
5
3