Henny Penny EVOLUTION ELITE EEG-141 - Manual (Page 47)

Model EEG-141, 142, 143, 144
To ensure proper burner operation, clean the blowers and blower
vents twice a year.
1. Press the main power switch to the OFF posistion.
2. Unplug power cord and turn the gas shut-off handle clockwise
to turn off the gas, and then disconnect the gas line.
3. Disconnect cable restraint and then carefully roll the fryer from
the hood far enough to get behind the fryer.
To avoid burns, use care when moving the fryer to prevent
hot cooking oil from splashing.
4. Using a cloth or paper towel, clean the blower intake slots to
ensure sufficient air flow to the blowers. Figure 1.
5. Using a Phillip’s-Head screwdriver, remove lower, rear panel.
Figure 2.
6. Using a cloth or paper towel, clean each blower opening.
Figure 3.
7. Clean the vent slots on the inside of rear panel, and then replace
panel. Figure 4.
8. Reattach the gas line and turn the shut-off handle counter-
clockwise to turn on the gas and reconnect the cable restraint to
the fryer.
9. Reattach the plug to electrical receptacle and roll fryer back into
place.
3-22. CLEAN BLOWER
& VENTS
Figure 1
Figure 2
Figure 3
Figure 4
1109 3-26