HP 310X - Manual (Page 105)

Choose to keep the existing driver, if prompted. Click
[Next]
. 9.
Enter a printer name, and choose whether this printer will be
the default printer. Click
[Next]
.
10.
Choose whether this printer will be available to other
computers. If shared, enter a share name that identifies the
printer to other users. Click
[Next]
.
11.
If desired, enter a location and other information for this
printer. Click
[Next]
.
12.
Choose whether to print a test page, and click
[Next]
. 13.
Click
[Finish]
to close the wizard. 14.
Installation note: If the LPD printer on the Windows 2000 server is
shared, Windows clients can connect to the printer on the 2000 server
using the Windows Add Printer utility in the Printers folder.
Back to start of Windows 2000 setup procedure
Back to start of entire LPD setup
©2000, 2001 Hewlett-Packard Company