HP 310X - Manual (Page 126)

1C
PRINT SERVER
NO DEFINED The file server does not have a print server object that corresponds to
the specified NetWare node name. Use printer installation software, a
NetWare utility (such as PCONSOLE), or another tool to create the
print server object.
Note: When the print server is configured for multiple file servers, the
error is only displayed on the configuration page if none of the file
servers was successfully connected.
1D
UNABLE TO
CONNECT TO
SERVER Remote Printer mode error. The print server was unable to establish an
SPX connection with the NetWare print server. Make sure that the
NetWare print server is running and that all cables and routers are
functioning correctly.
1E
FAIL RESERVING
PRINTER NUM The SPX connection to the print server was lost when the print server
attempted to reserve the printer number. This indicates a possible
network problem, or a problem with the print server. Make sure all
cables and routers are functioning correctly. Try restarting the print
server.
1F
ERR
NEGOTIATING
BUFFER SIZE A failure was detected when selecting the buffer size to be used when
reading print data from the file server. This may indicate a network
problem.
Note: When the print server is configured for multiple file servers, the
error is only displayed on the configuration page if none of the file
servers was successfully connected.
20
UNABLE TO
LOGIN A failure was detected when the print server tried to log onto the file
server. This could be caused by the print server object not existing on
the file server, or by a security check that prevents the print server from
logging in. Make sure the file server name and print server object name
are correct. Use PCONSOLE to erase the password for the print server
object. Create a new print server object.
Note: When the print server is configured for multiple file servers, the
error is only displayed on the configuration page if none of the file
servers was successfully connected.
21
UNABLE TO SET
PASSWORD A failure was detected when the print server tried to set the password
for the print server object. (Whenever the print server is able to log in
without a password, it sets the password automatically.) This indicates a
networking or security problem. Create a new print server object.
Note: When the print server is configured for multiple file servers, the
error is only displayed on the configuration page if none of the file
servers was successfully connected.
22
UNABLE TO
CONNECT TO
SERVER Queue Server mode error. The print server could not establish an NCP
connection to the file server. Make sure that the correct file servers are
connected.
Note: When the print server is configured for multiple file servers, the
error is only displayed on the configuration page if none of the file
servers was successfully connected.