HP 310X - Manual (Page 76)

IPX/SPX
Frame Type
The frame type to be used by the print server on your network.
After a frame type has been configured, all others will be counted
and discarded.
AUTO
(the default) senses all frame types and configures
the first one detected.
●
EN_8023 limits the frame type to IPX over IEEE 802.3
frames.
●
EN_II limits the frame type to IPX over Ethernet frames. ●
EN_8022
limits the frame type to IPX over IEEE 802.2
with IEEE 802.3 frames.
●
EN_SNAP limits the frame type to IPX over SNAP with
IEEE 802.3 frames.
●
Print Server
Name
The IPX/SPX name for the print server (alphanumeric characters
only). The default name is
NPIxxxxxx , where xxxxxx are the last
six digits of the print server’s LAN hardware (MAC) address.
SAP Interval
Specifies the time interval (in seconds) that the print server waits
to send Service Advertising Protocol (SAP) messages, which are
broadcast to advertise its service capabilities on a network. To
disable SAP messages, use the value “0”.
NDS Tree
Name
[not on 175x]
Specifies the name of the NDS tree for this device. The NDS
(Novell Directory Services) tree name refers to the name of the
organizational tree used by your network. To disable NDS
support, leave this field blank.
NDS Context
[not on 175x]
To disable NDS support, leave this field blank. The print server’s
NDS context refers to the NDS container or organizational unit
that contains the print server object. Print queue and device
objects can be located anywhere within the NDS tree, but the HP
Jetdirect print server must be configured with the fully-qualified
print server object name.
For example, if the print server object is found in the
container
marketing.mytown.lj and the print server object name
is lj_pserver , the fully qualified print server context name (CN)
is CN=lj_pserver.OU=marketing.OU=mytown.O=lj (where OU
is an Organization Unit container and O is an Organization
container within the NDS tree).
Note: NDS objects cannot be created by the embedded web
server.
Job Poll
Interval
[not on 175x]
Specifies the time interval (seconds) that the print server will wait
to check for print jobs in a print queue.