HP 310X - Manual (Page 78)

Set
Community
Name
An SNMP Set Community Name is a password allowing access to
configure (or “write”) SNMP control functions on the print server.
An incoming SNMP SetRequest must contain a community name
that matches the one stored on the print server before the print server
will respond. The community name must be ASCII characters and
can be up to 32 characters long. The default community name is
“public”.
Get
Community
Name
An SNMP Get Community Name is a password that allows “read”
access to SNMP information on the print server. The community
name must be ASCII characters and can be up to 32 characters long.
The default community name is “public”.
Select Language [not on 175x]
Clicking
Select Language
allows you to select another supported language in which
the web pages will appear. Supported languages may also be selected through
language preference settings in your browser (see your browser’s Help).
Support Info
Click on the Networking tab at the top of the web page. (Make sure that beneath
Configuration in the left column of the page, Support Info is selected.)
Use this page to configure links for Support assistance. You can designate a Support
person and phone number of an administrator for this device, as well as URL
addresses for web-based product and technical support. To assign a parameter
setting, enter the desired value and click
[Apply] .
USB Settings
Click on the Networking tab at the top of the web page. (Make sure that beneath
Configuration
in the left column of the page,
USB Settings
is selected.)
Use this page to configure parameters used for the USB connection to the printer. To
assign a parameter setting, enter the desired value and click
[Apply] .
USB Settings