HP 310X - Manual (Page 58)

ip-config
Selects the method for the print server to receive its IP configuration parameters: bootp
(default), dhcp , or manual .
bootp or dhcp The IP parameters will be automatically configured by a BOOTP or DHCP
server each time the print server is powered on.
manual The print server will wait for the basic IP parameters to be entered using manual
tools, such as this Telnet or other available tools . The status will be “user specified”.
See more info , including a caution.
ip
IP address for the print server, in dotted decimal notation. (See TCP/IP .) An example:
ip-config manual Specifies manual configuration.
ip 192.168.45.39 Manually sets the IP address 192.168.45.39 on the print server.
ip 0.0.0.0 Clears the IP address.
Note: If you exit and save a new IP address, it must be specified for the next Telnet
connection.
subnet-mask
If subnetting is used, use this field to manually assign a subnet mask. A subnet mask is a 32-bit
number that, when applied to an IP address, determines which bits specify the network and
subnet, and which bits uniquely specify the node. (See
TCP/IP .)
ip 0.0.0.0 Disables the subnet mask.
Note: If the print server is configured by DHCP and you manually change the subnet mask or
the default gateway address, you should manually change the IP address also. This will release
the DHCP-assigned address back to the DHCP IP address pool.
default-gw
Identifies the IP address of a router or computer that is used to connect to other networks or
subnetworks. (See
TCP/IP .)
Note: If the print server is configured by DHCP and you manually change the subnet mask or
the default gateway address, you should manually change the IP address also. This will release
the DHCP-assigned address back to the DHCP IP address pool.
Config Server
(read-only parameter) Reads the IP address of the server (such as a BOOTP or DHCP server)
that last configured the IP address on the print server.
TFTP Server
(read-only parameter) The IP address of the TFTP server that provided TFTP parameters to the
print server.
TFTP Filename
(read-only parameter) The path and TFTP filename of the TFTP server, for example,
hpnp/printer1.cfg .