HP 310X - Manual (Page 92)

Enabling/disabling: Both alternatives—the print server's support of the full-function
client scanning software and the print server's embedded web server Web Scan
facility—are enabled by default and therefore available to the network clients. Either
or both can be disabled (and then enabled again) in the print server's configuration.
Methods for making these configuration changes:
Telnet ●
The embedded web server’s
Networking
configuration facility:
Click on the Networking tab at the top of the web page. In the left column of
the page (in the Configuration list, select Other Settings . To assign a
parameter setting, enter the desired value and click [Apply] . Networking
configuration reference . The parameters are the following:
Enable Web Scan
Enable Scan-to-email
are the parameters used to disable and enable Web Scan, with or without
the e-mail capability, in the print server's embedded web server. Both
are enabled by default.
Enable Web Scan must be enabled if Enable
Scan-to-email
is enabled.
❍
Enable MFP and AIO software support
is the parameter used to disable and enable the print server's support of
the full-function client scanning software. It is enabled by default.
❍
●
Back to start of disabling web scanning
Back to start of web scanning
Back to directory of all pages and features in the embedded web server
Back to start of the embedded web server
Compatible Web Browsers
The embedded web server has been tested with the following web browsers:
Windows 95/98 and NT 4.0:
Microsoft Internet Explorer 5.0 , 5.01, 5.5 ❍
Netscape Navigator 4.6x, 4.7x, 6.0, 6.1 ❍
●
Windows 2000:
Microsoft Internet Explorer 5.0 , 5.5 ❍
Netscape Navigator 4.6x, 4.7x, 6.0, 6.1 ❍
●
Windows Millennium (ME):
Microsoft Internet Explorer 5.0, 5.5 ❍
Netscape Navigator 4.6x, 4.7x, 6.0, 6.1 ❍
●
MacOS 8.6 and later, 9.0:
Microsoft Internet Explorer 5.01 ❍
Netscape Navigator 4.6x, 4.7x, 6.0, 6.1 ❍
●
HP-UX 10.20:
Microsoft Internet Explorer 5.0 and later ❍
●