Ipx/spx protocol information – HP 310X User Manual

Page 120

Advertising
background image

BOOTP/DHCP
Server

Displayed during initialization while the print server attempts to obtain its
TCP/IP configuration from a BOOTP or DHCP server. The temporary address
displayed is

0.0.0.0.

Not Specified

the configuration server’s IP address could not be

determined or was set to zero in the response packet.

TFTP
Server

The IP address of the system where the TFTP configuration file is located.
During initialization, the temporary address

0.0.0.0

is displayed.

Not Specified

a TFTP server has not been not been set.

Config
File

The name of the print server’s configuration file. The file pathname may be
truncated to fit on rest of the one line allocated.

Not Specified

a file was not specified in the BOOTP reply from

the host.

Domain
Name

The Domain Name System (DNS) name of the domain in which the print
server resides (for example,

support.company.com

). It is not the fully

qualified DNS name because the host printer name is not included (for
example:

printer1.support.company.com

).

Not Specified

a domain name has not been configured on the

print server.

DNS Server

The IP address of the Domain Name System (DNS) server.

Not Specified

a DNS server’s IP address has not been

configured on the print server.

WINS
Server

The IP address of the Windows Internet Name Service (WINS) server.

Not Specified

a WINS server’s IP address has not been

configured on the print server.

Syslog
Server

The IP address of the syslog server configured on the print server.

Not Specified

a syslog server has not been configured.

Idle
Timeout

The timeout value expressed in seconds after which the print server closes an
idle TCP print data connection. Acceptable values are integers between 0 and
3600 seconds. A value of zero turns off the timeout mechanism. The default
value is 270 seconds.

Web
Jetadmin
URL

If the print server is found on the network by HP Web Jetadmin, the URL of
the host system used for HP Web Jetadmin services is displayed. The URL is
limited to two lines and may be truncated.

Not Specified

the URL of the HP Web Jetadmin host system

could not be identified or is not configured.

Back to Top

IPX/SPX Protocol Information

Provides the current status and parameter values for the IPX/SPX network protocols.

Message

Description

Advertising
This manual is related to the following products: