Honeywell HRSD4 - Manual (Page 48)

Configuration
48
Figure 3-16 S.M.A.R.T. Setup Screen
Your DVR shows the conditions of Hard Disk Drives if the installed IDE hard disk drives
support the S.M.A.R.T. Monitoring program.
Save your changes by highlighting OK and pressing . Select Cancel to exit the
screen without saving the changes.
Table 3-5 S.M.A.R.T. Setup Screen Options
Option Function
Use Highlight the field beside Use. Press to toggle the
S.M.A.R.T. Monitoring program On and Off.
Last-check The Last-check field shows the date and time information
of the last storage check.
Period Highlight the field beside Period, and select from Daily,
Weekly, or Monthly for the checking period.
Note When selecting Weekly, the Day of Week field becomes active under the
Period field, with choices of Sunday to Saturday. When selecting Monthly, the
Day of Month fields become active under the Period field, with choices of the
1
st
to the 28
th
day of the month.
Check Time Highlight the field beside Check Time, and adjust the
numbers using the Up and Down arrows.
Temperature Threshold Highlight the field beside Temperature Threshold and
adjust the numbers using the Up and Down arrows.
Sensor Unit Highlight the field beside Sensor Unit and select from
Celsius or Fahrenheit.
Note To check the storage status instantly, highlight Check Now and press .