Hitachi 3300MFP - Manual (Page 217)

EN 215
Glossary
Term Definition
10-BaseT A type of Ethernet network that uses twisted pair cabling to attach nodes
to the network.
100-BaseTx A type of Ethernet network, also known as Fast Ethernet, that uses
twisted pair cabling to attach nodes to the network.
10/100-BaseTx This term indicates that a product is compatible with both 10-BaseT and
100-BaseTx. Many network products are compatible with both of these,
including some HP Jetdirect print server models.
1284-B 1284 is a parallel port standard developed by IEEE (the Institute of
Electrical and Electronics Engineers). 1284-B refers to a specific
connector type on the end of the parallel cable which attaches to the
peripheral (for example, a printer). A 1284-B connector is bigger than a
1284-C connector, for example.
actual size The size of the page when it was scanned (not enlarged using zoom in or
reduced using zoom out).
ADF Automatic document feeder. The ADF is used to automatically feed
originals into the product for copying, scanning, or faxing.
annotation A word, note, mark, or highlighting added to an item.
appletalk An inexpensive local area network architecture built into all Apple
Macintosh computers.
bit depth The number of bits used to process scanned images. The greater the
number of bits, the more levels of gray that can be used to display the
image.
.bmp file A Microsoft Windows bitmap file that has the extension .bmp. A bitmap file
defines an image (such as the image of a scanned page) as a pattern of
dots (pixels).