Using fax forwarding, To use fax forwarding, Using fax polling – Hitachi 3300MFP User Manual
Page 95: To poll (request a fax from) another fax machine, Enabling an extension phone, To enable an extension phone, Enabling an, Extension phone
EN
Using fax forwarding 93
Using fax forwarding
You can set your product to forward incoming faxes to another fax number. When the fax arrives at
your product, it is stored in memory. Then your product dials the fax number you have specified
and sends the fax. If it cannot forward a fax because of an error (for example, the number is busy)
and repeated attempts to redial are unsuccessful, your product will print the fax.
If the product runs out of memory while receiving a fax, it will terminate the incoming fax and only
forward the pages and partial pages already stored in memory.
When using this feature, the product must be the one receiving faxes (not the computer) and the
answer mode must be set to Automatic (see
Changing how the product answers incoming faxes
).
To use fax forwarding
1
Press menu/enter.
2
Use the < or > button to select
Fax Setup
and press menu/enter.
3
Use the < or > button to select
Fax Recv. Setup
and press menu/enter.
4
Use the < or > button to select
Forward Fax
and press menu/enter.
5
Press > to select
On
or
Off
and press menu/enter.
6
If you choose to turn fax forwarding on, use the alphanumeric buttons to enter the fax number
where you want the fax to go, and press menu/enter to save your selection.
Using fax polling
If someone else has set up a fax to be polled, you can request that the fax be sent to your product
(this is known as polling another machine).
To poll (request a fax from) another fax machine
1
Press menu/enter.
2
Use the < or > button to select
Fax Functions
and press menu/enter.
3
Use the < or > button to select
Polling Receive
and press menu/enter.
4
Use the alphanumeric buttons to enter the number of the fax machine that you want to request
the fax from and press menu/enter.
5
Your product dials the other fax machine and requests the fax.
Enabling an extension phone
With this setting turned on, you can alert the product to pick up the incoming fax call by pressing
1-2-3 sequentially on the telephone keypad. The default is Yes. Turn this setting off only if you have
a service from your telephone company that also uses the 1-2-3 sequence. The service will not
work if it conflicts with the product.
To enable an extension phone
Use the following instructions to enable an extension phone:
1
Press menu/enter.