Changing the number of copies, To change the number of copies for the current job, To change the default number of copies – Hitachi 3300MFP User Manual
Page 62: Using hp laserjet copier software
60 5 Copying
EN
Changing the number of copies
You can choose to have the default number of copies be any value from 1 to 99.
To change the number of copies for the current job
1
From the product’s control panel, press # of copies and use the < and > buttons to inicrement
or decrement the quantity that appears in the control panel display;
OR
Use the numeric keypad to enter the number of copies (between 1 and 99) that you want to
make for your current job.
2
Press start/copy to begin copying your job.
To change the default number of copies
1
From the control panel, press menu/enter.
2
Use the < and > buttons to select
Copy Setup
and press menu/enter.
3
Use the < and > buttons to select
Def. # of Copies
and press menu/enter.
4
Use the numeric keypad to enter the number of copies (between 1 and 99) that you want as
the default.
5
Press menu/enter to save your selection.
Note
The default set at the factory for number of copies is
1
.
Using HP LaserJet Copier software
You can use HP LaserJet Copier to perform any of the following tasks when you copy your original:
●
Print up to 99 copies of the same document
●
Enable or disable collation
●
Reduce or enlarge the image
●
Adjust the contrast
●
Specify the copy quality
●
Make color copies by sending to a color printer using HP LaserJet Copy Plus
Note
This functionality is not available in Windows 95.
To access HP LaserJet Copier (Windows or Macintosh)
To access HP LaserJet Copier, use one of the following methods:
●
From HP LaserJet Director, click Copy or Copy Plus.
●
From the Windows task bar, click Start, Programs, HP LaserJet 3300, and HP LaserJet
Copier.
●
From HP LaserJet Document Manager (Windows), click the Copier icon.
OR
From HP Workplace (Macintosh), click the Copy or Copy Plus icon.