High End Systems SHOWGUN - Manual (Page 33)

CHAPTER 3
SHOWGUN® Menu System
SHOWGUN ® User Manual 21
INFOMATION
MENU
DMX VALUES
MENU
1:### ### ###
4:### ### ### Displays current values for all channels in
groups of six DMX values/screen
TEMPERATURES
MENU
CURRENT
After selecting CURRENT , MAXIMUM or MINIMUM ,
you can view the temperature for the
following sensors:
TOPBOX: ###C
HEAD 1: ###C
LED TRACKING:
###C
MAXIMUM
MINIMUM
TEMP RESET
Default setting is NO . Select YES and press
Enter for 5 seconds to reset all sensors to
Current Temperature
FIXTURE HOURS:
Displays fixture operation time in
hours:minutes
FIXTURE HOURS
RESET:
NO Default “safe” setting
YES
Press Enter for 5 seconds to reset fixture
hours to 0
LAMP HOURS:
Displays lamp operation time in
hours:minutes
LAMP STRIKES: Displays current number of lamp strikes
LAMP HR/STRIKE
RESET: ###
NO Default “safe” setting
YES
Press Enter for 5 seconds to reset fixture
hours to 0
LAMP STATUS:
LAMP OFF
Displays current lamp
status
LAMP ON
LAMP STRIKING
LAMP ERROR
SOFTWARE
VERSION:
V ##.##.### Major.Minor.Build
MODULE VERSION
MENU
PAN
HW:# SW:#
Displays the Hardware and Software
versions for each logic board in the fixture.
TILT
HW:# SW:#
SHUTTER/CYAN
HW:# SW:#
MAG/YELLOW
HW:# SW:#
EDGE/GOBO/ROT
HW:# SW:#
FOCUS/ZOOM/IRIS
HW:# SW:#
RGB LED CONTROL
HW:# SW:#
DISPLAY -
NOT AVAILABLE
Displays NOT AVAILABLE if a board does not
exist in that position.
Level 1 Level 2 Option/Setting Description/Notes