Pan invert, Tilt invert, Pan invert tilt invert – High End Systems SHOWGUN User Manual
Page 37
CHAPTER 3
SHOWGUN® Menu System
SHOWGUN
®
User Manual
25
Pan Invert
This menu option inverts the direction of
the pan motor to coordinate movements
between fixtures mounted opposite each
other horizontally.
To invert the fixture’s Pan motion:
1. Press the Menu button to unlock the menu system or to move back up the system to the top
level menus.
2. Using the left and right arrows on the Center button, scroll through the top level to
SET
PARAMETERS MENU
and press the Enter button to select.
3. Using the left and right arrows on the Center button, scroll to
PAN
INVERT
. The current state
(
ENABLED
or
DISABLED
) will be displayed.
4. Use the up and down arrows on the Center button to scroll to
ENABLED
to invert Pan
movement or
DISABLED
to revert fixture to default setting and press the Enter button to
select.
Tilt Invert
This menu option inverts the direction of the tilt motor to coordinate movements
between fixtures on a link facing each other vertically.
To invert the fixture’s Tilt motion:
1. Press the Menu button to unlock the menu system or to move back up the
system to the top level menus.
2. Using the left and right arrows on the Center button, scroll through the top
level to
SET PARAMETERS MENU
and press the Enter button to select.
3. Using the left and right arrows on the Center button, scroll to
TILT
INVERT
.
The current state (
ENABLED
or
DISABLED
) will be displayed.
4. Use the up and down arrows on the Center button to scroll to
ENABLED
to
invert Tilt movement or
DISABLED
to revert fixture to default setting and
press the Enter button to select.