High End Systems SHOWGUN - Manual (Page 43)

CHAPTER 3
SHOWGUN® Menu System
SHOWGUN ® User Manual 31
Fixture Hours Reset
Use this option to reset the fixture operation time to Zero.
To access the FIXTURE HOURS RESET option:
1. Press the Menu button to unlock the menu system or to move back up the system to the top
level menus.
2. Use the left and right arrows on the Center button to scroll to the INFORMATION MENU and press
the Enter button to select.
3. Use the left and right arrows on the Center button to scroll to the
FIXTURE HOURS RESET option and press the Enter button to select.
4. Use the up and down arrows on the Center button to scroll to YES . Press and hold the Enter
button down for 5 seconds to select.
Lamp Hours
Use this option to view the lamp operation time in hours and minutes.
Lamp Strikes
Use this option to view the total number of lamp strikes.
Lamp HR/Strike Reset
After installing a new lamp the Lamp hours and Lamp strike sensors must be reset to 0 before the
Lamp will strike.
To access the LAMP HR/STRIKE RESET option:
1. Press the Menu button to unlock the menu system or to move back up the system to the top
level menus.
2. Use the left and right arrows on the Center button to scroll to the INFORMATION MENU and press
the Enter button to select.
3. Use the left and right arrows on the Center button to scroll to the
LAMP HR/STRIKE RESET option and press the Enter button to select.
4. Use the up and down arrows on the Center button to scroll to YES . Press and hold the Enter
button down for 5 seconds to select.
Lamp Status
This option displays the current Lamp Status as LAMP OFF, LAMP ON, LAMP STRIKING , or LAMP ERROR .
Software Version
This option display’s the fixture’s CPU board Software version. The version number is composed
of: V(Major).(Minor).(Build).