Rgb color, Led tracking system, Led tracking functions – High End Systems SHOWGUN User Manual

Page 48: Led tracking system dimming, Dim tracking mode, Tracking system independent dim mode, Led tracking functions led tracking system dimming

Advertising
background image

CHAPTER 4

Fixture Programming

36

SHOWGUN

®

User Manual

RGB Color

The LED Tracking System uses Red, Green and Blue LEDs (RGB) to produce a color spectrum you
can control and dim independently from the main output beam. There are 36 RGB LED modules
that make up the LED Tracking System. Each RGB Module consists of a homogenizing lens and an
RGB die.

LED Tracking System

The LED Tracking System uses 3 watt LEDs that can produce close to 5000 lumens of light and
can be used along with or independent from the main output.The LED Tracking System allows you
to select an LED color that matches the color from the main output beam or tracks with a
complementary color.

LED Tracking Functions

The LED Tracking System is capable of strobing and other effects independent from those applied
to the main output beam.

Color Function

Description

Continuous

Allows exact intensity control of each LED color.

Random

Selects whole colors at variable speeds.

Cycle

Cycles through colors.

Periodic Strobe

Strobes LEDs at specified intervals.

LED Tracking System Dimming

Most automated luminaires have a single intensity system. In addition to the main output
intensity, the SHOWGUN provides an additional intensity system for the LED Tracking System. It
operates in two modes.

Dim Tracking Mode

In this mode, the LED Tracking System dims as the main output dims. When the Output Dim
channel is set at a lower intensity, it will override the LED Tracking Dim channel. Visually, the
lowest level takes precedence. This ensures that both intensity systems black out when the main
output blacks out (for example, when using the console’s Grand Master)

NOTE: You can view LEDs alone in the tracking mode if you close the lamp shutter.

Tracking System Independent Dim Mode

In this mode, the Dim parameter operates independently from the LED Tracking Dim Parameter,
allowing separate control over output dimming and LED dimming.

NOTE: This mode may result in SHOWGUN fixtures outputting LED intensity

when the console Grand Master is at zero.

Advertising