High End Systems SHOWGUN - Manual (Page 47)

CHAPTER 4
Fixture Programming
SHOWGUN ® User Manual 35
Color Mixing
The SHOWGUN ® fixture has two color mixing systems. A CMY system that is comprised of a
dichroic color mixing system for output from the Output Lens and a RGB color mixing system that
is comprised of 36 RGB Modules in the LED Tracking system.
CMY Color
The CMY color mixing system creates and infinite range of color by moving pairs of Cyan, Magenta
and Yellow flags. Several color selection modes are available in either full speed (controller
crossfading the wheel positions), or MSpeed (MSpeed control of the wheel motor). For more
information on MSpeed, see MSpeed (Motor Speed) on page 38.
The Color Function you choose will effect which parameter values are available for each individual
color (Cyan, Magenta, and Yellow). The following table describes the Color Functions available on
the SHOWGUN fixture.
Color Function Description
Continuous Allows exact positioning at any point on the color wheel
Random Selects whole color positions at variable speeds
Cycle Cycles through colors
Tri-Color, single flag Controls movement of one flag of a pair with the other flag open
Tri-Color, dual flag Controls movement of one flag of a pair with the other flag closed (fully
saturated)
Tri Color
Independent control over individual flags in each color pair allows you to create tri-color beam
effects. You can choose whether to control one or both flags of a pair.
Flag 1
Flag 2
SINGLE FLAG MODE
DUAL FLAG MODE
0
100%
Flag 1
Flag 2
127-128 254-255
50%