Genius niu specifications, Genius niu compatibility – FANUC Robotics America GFK-1535A User Manual

Page 10

Advertising
background image

1-6

VersaMax™ System Genius® Network Interface Unit User's Manual – November 2000

GFK-1535A

1

Genius NIU Specifications

Number of Modules

8 per rack, 64 per NIU/station

Network inputs per bus scan

128 bytes

Network outputs per bus scan

128 bytes

Discrete Input Memory

1024 points

Discrete Output Memory

1024 points

Analog Input Memory

64 channels

Analog Output Memory

64 channels

Power Consumption

+5V@250mA, +3.3V@10mA

Serial Bus Address

0 to 31

Network data rate

153.6 Kbaud extended, 153.6 Kbaud
standard, 76.8 Kbaud, or 38.4 Kbaud.

Genius NIU Compatibility

Network Interface Unit IC200GBI001 is compatible with:

T

For a Series 90

-70 PLC

V

CPU firmware, release 3.0 or later.

V

Bus controller release 5.4 or later.

V

If the IC641SWP701/704 programming and configuration software is
used, it must be release 3.0 or later:

T

For a Series 90

-30 PLC

V

CPU firmware: any version. For expansion compatibility for CPUs
350, 352, 360, 363, and 364, version 10.0 or later is needed. Versions
earlier than 10.0 of any Series 90-30 CPU will go to Stop/Faulted
mode if an Add/Loss of Rack (expansion) fault is logged.

V

Bus Controller: any version.

T

For a Series Six

PLC:

V

CPU: rev. 105 or later

V

Programming Software: Release 4.02 or later

V

Bus controllers: IC660CBB902 or 903, version 1.7 or later

Advertising