Thermal considerations, 2thermal considerations – FANUC Robotics America GFK-1535A User Manual
Page 22
Advertising
GFK-1535A
Chapter 2 Installation
2-3
2
Thermal Considerations
The thermal performance specified for VersaMax I/O modules requires a clearance
of 2 inches (5.1cm) above and below the modules and 1 inch (2.54cm) on each side
of the modules as shown below, regardless of the orientation of the DIN rail.
When using a vertical DIN rail, the NIU module must be installed at the bottom.
5.1cm
(2.0in)
2.54cm
5.1cm
(2.0in)
2.54cm
(1.0in)
5.1cm
(2.0in)
2.54cm
(1.0in)
5.1cm
(2.0in)
2.54cm
(1.0in)
NIU
at Bottom
Advertising