Inserting battery – Fujitsu Siemens Computers LOOX 400 User Manual
Page 20
Operating the Pocket PC
12
A26391-K150-Z120-1-7619, Edition
3
Inserting battery
2
1
6
5
4
3
►
Slide the locking device (1) in the direction of the arrow and hold it pressed.
►
Pull the cover (2) off the Pocket PC in the direction of the arrow.
►
Lay the battery in the battery compartment (3 + 4). Watch the contact connections.
►
Slide the locking device (5) in the direction of the arrow and hold it pressed.
►
Slide the cover (6) in the direction of the arrow as far as it will go.
i
The battery is not charged at the time of delivery. Therefore, charge the battery for
12 hours before the first mobile use (see "Connecting PSC11R-050 power adapter"
section).
When you replace the battery, an internal backup battery prevents your data from being
lost. This backup battery can buffer the data for up to 30 minutes. The buffer time is
dependent on the charging level of the backup battery.