Fujitsu Siemens Computers LOOX 400 - Manual (Page 40)

Operating the Pocket PC
32 A26391-K150-Z120-1-7619, Edition 3
Restoring
The backup data saved on the memory card are restored in the RAM memory of the Pocket PC. All
data in the RAM memory are restored as they were at the time of the backup. This also means that
all data currently in the RAM memory of the Pocket PC are overwritten.
► Select
Start - Programs - FSC Backup.
► When the screen of the FSC Backup appears, select the memory card from which the backup is
to be restored.
FSC Backup
indicates whether backup data are present on a memory card and when these
were generated.
► Tap on the Restore button.
FSC Backup asks you whether you really want to restore the data.
►
Tap on the Yes button if the data are to be restored and on the No button if this is not the case.
A message is output when the restoration has been completed.
► Touch
OK (navigation bar) to confirm your setting.
The Pocket PC is reset and restarted.
Using optional cradle
With the optional cradle you can charge the battery in the Pocket PC and/or carry out a data
synchronisation between the Pocket PC and a PC/notebook.
Selecting location for cradle
Place the cradle on a stable, flat and nonslippery surface. In view of the multitude of different
finishes used on furniture, it is possible that the rubber feet of the Pocket PC will mark the surface
they stand on.
The cradle and the PSC11R-050 power adapter should be at least 200 mm apart.
Keep other objects 100 mm away from the cradle and its PSC11R-050 power adapter to ensure
adequate ventilation.
The Pocket PC and the cradle should not be subjected to extreme environmental conditions. Protect
the Pocket PC and cradle from dust, moisture and heat.