Removing memory card, On the road with the pocket pc – Fujitsu Siemens Computers LOOX 400 User Manual
Page 32
Operating the Pocket PC
24
A26391-K150-Z120-1-7619, Edition
3
Removing memory card
2
3
1
►
Press on the edge of the memory card (1) so that the memory card jumps out of the slot
slightly.
►
Slide the memory card out of the Pocket PC (2).
►
Insert the placeholder (3) again into the slot if necessary.
The placeholder protrudes one to two millimetres.
On the road with the Pocket PC
Your Pocket PC is equipped with a powerful battery. When you are away from your home or office,
your Pocket PC is supplied with power by the installed battery and you can work for up to 10 hours
without an electrical socket. At your home or office you can recharge the battery in the optional
cradle. You can also take along the PSC11R-050 power adapter and connect your Pocket PC
directly to an electrical outlet to recharge the battery when you're on the go.
In this chapter you'll learn how to charge the battery and use it most efficiently for mobile operation.
In addition, you'll find important information on transporting your Pocket PC and explanations on
what you should watch when travelling with your Pocket PC in this chapter.