Fujitsu Siemens Computers LOOX 400 - Manual (Page 50)

Configuring the Pocket PC
42 A26391-K150-Z120-1-7619, Edition 3
Monitoring battery charge level
You can display the battery charge level under Start - Settings - System - Power.
If the battery charge level is very low, you will be warned with a dialog window during operation.
Then immediately connect your Pocket PC to an electrical outlet.
If you do not immediately connect your Pocket PC to the mains power, the Pocket PC will
automatically switch itself off. The data in the RAM memory remains intact for several hours.
However, if the Pocket PC is still not connected to the mains power during this period, all data that is
only in RAM (such as documents, additionally installed programs, personal settings) will be lost. In
other words, your Pocket PC is reset to the delivery state.
Using energy-saving functions
You can save energy in several ways to optimally utilise the battery operating time:
– Switch the Pocket PC into the Suspend mode when you are not using it.
– Reduce the processor speed.
– Switch the display lighting off or reduce the brightness.
– Switch off the sound, reduce the volume or only allow acoustic signals for certain
applications.
Switching the Pocket PC into Suspend mode
►
Select the number of minutes after which the Pocket PC is to switch into the Suspend mode
when it is not used under Start - Settings - System - Power.
The desired settings are made separately for battery operation and with a power outlet.
► Touch
OK (navigation bar) to confirm your setting.
i
► Press the Suspend/Resume button to deactivate the Suspend mode.
The Pocket PC returns to the point at which you interrupted your work.