Transporting pocket pc, Information on travelling – Fujitsu Siemens Computers LOOX 400 User Manual

Page 37

Advertising
background image

Operating the Pocket PC

A26391-K150-Z120-1-7619, Edition 3

29

Transporting Pocket PC

Switch the Pocket PC into the Suspend mode.

Pull the PSC11R-050 power adapter out of the electrical outlet.

Disconnect the power adapter cable and the ActiveSync cable.

If the device needs to be shipped, use the original packaging or other suitable packaging to
protect it from damage caused by mishandling.

Use a pouch for transporting the Pocket PC that provides protection against jolts and impacts
(the protective pouch is available as an accessory).

Protect the Pocket PC from severe shocks and extreme temperatures (e.g., direct sunlight in a
car).

Information on travelling

If you wish to use your Pocket PC during a flight, check first with the airline if this is allowed
and under which conditions. Switch off Bluetooth and wireless LAN. Also observe the
information in the "Wireless communication with Bluetooth" chapter and the safety precautions
in the "Safety and Ergonomics" manual with regard to Bluetooth.

In some countries the use of Bluetooth is restricted or completely prohibited. Ask about the
regulations in the country you will be travelling in before starting your trip. As a precaution,
switch Bluetooth off in case there is any uncertainty at your place of residence.

If you are travelling abroad, ensure that the PSC11R-050 power adapter can be operated with
the local mains voltage. Do not use any other voltage converter!

i

If you travel in another country, check whether the local power supply and the
specifications of the PSC11R-050 power adapter are compatible.
Only use connection adapters approved for your Pocket PC.

If you use a modem, incompatibilities with the local telecommunications system may result.

Advertising