Fujitsu Siemens Computers LOOX 400 - Manual (Page 25)

Operating the Pocket PC
A26391-K150-Z120-1-7619, Edition 3 17
Switching Pocket PC off and on
You usually switch the Pocket PC into the Suspend mode with the Suspend/Resume button. After
certain applications or the installation of new programs, it may be necessary to restart the Pocket
PC with the soft reset. Only in seldom, isolated cases is it practical or necessary to reset the Pocket
PC to the delivered state.
These three options for switching the Pocket PC off and on are explained in the following sections:
●
Switching Pocket PC off and on during normal use
● Switching Pocket PC off and on with Soft Reset function
● Resetting Pocket PC to delivered state
Switching Pocket PC off and on during normal use
Switching off with Suspend/Resume button
►
Briefly press the Suspend/Resume button to switch off the Pocket PC.
The Pocket PC is switched to suspend mode.
i
If you have specified a switch-off time with the system settings, your Pocket PC will
automatically switch into the Suspend mode after this specified time.
There are two ways to switch on your Pocket PC:
Switching on with Suspend/Resume button
►
Briefly press the Suspend/Resume button to switch on the Pocket PC.
The application you were working on before you switched off the Pocket PC with the
Suspend/Resume button appears on the screen. The Today screen appears if you switch on your
Pocket PC again with the Suspend/Resume button after more than four hours.