Fujitsu Siemens Computers LOOX 400 - Manual (Page 26)

Operating the Pocket PC
18 A26391-K150-Z120-1-7619, Edition 3
Switching on with application buttons
In the default configuration you can also switch on your Pocket PC by briefly pressing the application
buttons (Number 14, 15, 17 and 18 in the section "Overview of operating elements and
connections"). The applications assigned to the respective button appears on the screen. The
applications FSC SpeedMenu, Today, Contacts and Calendar are preset. However, you can change the
applications to be called up at any time according to your needs (see the "Configuring the Pocket
PC” chapter) so that your preferred program opens immediately at the press of a button.
i
By making the appropriate setting in FSC KeyLock (see chapter "Configuring the Pocket
PC"), you can also prevent the Pocket PC from being switched on when an application
button is pressed.
Switching on and off with soft reset (warm boot)
After certain applications or the installation of new programs, it may be necessary to restart the
Pocket PC with the soft reset.
!
Data not yet saved in a file will be lost during this procedure. On the other hand, data in
the RAM memory are retained.
►
End all applications before you carry out a soft reset.
2
1
► Take the stylus and screw it apart (1).
► Briefly press the tip (2) into the soft reset opening.
The warm boot is carried out. The application you have just been working in appears on the display
of your Pocket PC.