Fujitsu Siemens Computers LOOX 400 - Manual (Page 41)

Operating the Pocket PC
A26391-K150-Z120-1-7619, Edition 3 33
Using cradle for data synchronisation
i
Before the first data synchronisation between the Pocket PC and the PC/notebook, you
must install the program ActiveSync on your PC/notebook (see the section "Initial start-
up").
3
5
4
2
1
► Switch your PC or notebook on.
► Place the Pocket PC in the cradle (1).
► Connect the ActiveSync cable (2) to the ActiveSync port of the cradle.
► Connect the ActiveSync cable to a USB port (3) of your PC/notebook.
The Pocket PC is now connected to your PC/notebook. The ActiveSync partnership between your
Pocket PC and your PC/notebook will be established.
If the battery charge level of your Pocket PC is low, you should connect the PSC11R-050 power
adapter (see the section "Connecting PSC11R-050 power adapter").
i
You can leave the connections between the cradle and PSC11R-050 power adapter, and
between the cradle and your PC/notebook connected all the time. This means you only
need to place your Pocket PC in the cradle to charge the battery and for data
synchronisation.
You can also connect your Pocket PC directly to your PC/notebook with the ActiveSync
cable.
You will find more information on data synchronisation in the "Synchronising data with ActiveSync"
section and in the help file on your Pocket PC.