Fujitsu Siemens Computers LOOX 400 - Manual (Page 57)

Connecting and networking the Pocket PC with other devices
A26391-K150-Z120-1-7619, Edition 3 49
Selecting location for Bluetooth operation
● We recommend that you use the Pocket PC with the Bluetooth components in a typical
operating environment. Other Bluetooth devices, which you want to communicate with, should
be located at a distance of up to 10 m.
● Only install a partner device within the recommended distance. Observe the output power
class of the partner device when doing so. Details are contained in the operating manual of the
partner device.
● Use the Pocket PC with the Bluetooth at least 2 m away from other electrical or electronic
systems. If you must use the Pocket PC near a microwave cooker, then maintain a distance of
at least 3 m from the microwave cooker, as the reception is subject to interference with regard
to microwaves.
● Should problems result when communicating via Bluetooth because radios or radio devices
are located in the vicinity, then move the Pocket PC to a different location.
Activating and deactivating Bluetooth
You can switch Bluetooth on and off just as you wish. This enables you to also use your Pocket PC
wherever radio modules such as Bluetooth may not be operated, such as hospitals and aircraft
(please also observe the safety precautions in the "Safety and Ergonomics" manual on this point).
Switch off Bluetooth at places like this. This will interrupt the Bluetooth connection.
►
Touch the Bluetooth symbol of the Today screen (the Bluetooth symbol is located on the right
in the bottom bar).
You can switch Bluetooth on and off here.
Wireless connection via Wireless LAN (optional)
If your Pocket PC has an integrated Wireless LAN installed, you will find information on it in the help
file on your Pocket PC.
In the same way as Bluetooth, you can also activate and deactivate the integrated Wireless LAN
just as you wish.
► Touch
the WLAN Power symbol under Start - Settings - System.
You can switch wireless LAN on and off here.