Fujitsu Siemens Computers LOOX 400 - Manual (Page 27)

Operating the Pocket PC
A26391-K150-Z120-1-7619, Edition 3 19
Resetting Pocket PC to delivered state
If your Pocket PC does not continue operating and switching off and on with the Suspend/Resume
button and the soft reset fail to function, you can reset your Pocket PC to the delivered state.
!
When you reset your Pocket PC to the delivered state, the battery switches off so that the
RAM content is lost. This means you loose all data (documents, additionally installed
programs, personal settings) that you haven't saved elsewhere.
►
Therefore, remember to make a regular data backup with synchronisation (see
"Synchronising data with ActiveSync" section) or on corresponding memory cards
(available as an accessory). The program is provided on your Pocket PC for
completely backing up the RAM memory on memory cards (see "Backing up data
with FSC Backup" section).
► Take the stylus and screw it apart.
1
2
► Simultaneously press the Suspend/Resume button (1) and the tip (2) into the soft reset
opening.
i
After approximately 10 seconds a picture appears on the display and a tone sounds.