Fujitsu Siemens Computers LOOX 400 - Manual (Page 24)

Operating the Pocket PC
16 A26391-K150-Z120-1-7619, Edition 3
Starting Pocket PC the first time
1 2
► Press the Suspend/Resume button (1) to switch on the Pocket PC.
► Pull out the pen (2) in the direction of the arrow.
Adjusting touchscreen
The display of your Pocket PC is a touchscreen. To ensure that the touchscreen of your Pocket PC
reacts correctly when touched with the stylus, you will be asked to align the touchscreen after the
initial start-up.
Touch the centre of the cross hairs that appears on the display with the stylus. This procedure must
be repeated several times, whereby the cross hairs appear at different locations on the display each
time. Follow the instructions on the display.
i
To optimize the responsiveness of the touchscreen when touched with the stylus, you can
also always realign the touchscreen (under Start - Settings - System).
Becoming familiar with basic operation
Next the operating system provides a brief introduction to the operation of the Pocket PC with the
stylus after the initial start-up.
►
Follow the instructions on the display.
Today screen
Following the introduction the Today screen appears. The Today screen always appears when you
switch on the Pocket PC again after you have not used it for four or more hours. The Today screen
shows all important current information at a glance. From this screen you have access to all
programs and to the system settings.
i
Please also use the help function that is available on your Pocket PC if you want to know
more about operating the programs contained in the operating system.