Inserting and removing memory cards, Inserting memory card – Fujitsu Siemens Computers LOOX 400 User Manual
Page 31
Operating the Pocket PC
A26391-K150-Z120-1-7619, Edition 3
23
Inserting and removing memory cards
A slot enables the operation of a memory card of the type "Secure Digital I/O" or "MultiMediaCard".
!
Observe the manufacturer's information when using memory cards.
Never use force when inserting or removing a memory card.
Make sure that no foreign objects enter the slot.
Inserting memory card
2
3
1
►
Also press on the edge of the placeholder (1) so that the placeholder is pushed out of the slot
somewhat.
►
Pull the placeholder out of the Pocket PC (2).
►
Carefully push the memory card (3) into the slot.
The memory card may protrude by one to several millimetres (depending on the memory card type).
i
Keep the placeholder for the memory card in a safe place. When you remove the memory
card again, you should reinsert the memory card placeholder. This prevents foreign matter
from getting into the slot.