Frymaster FDP65 User Manual

Page 36

Advertising
background image

FRYMASTER FPD65 SERIES GAS FRYERS

CHAPTER 5: FILTRATION OPERATION

5-9

5.4.1 Filter Operation (cont.)


8. Begin the filtering process by pulling the

yellow handle to open the oil-return valve
(this activates the filter pump automatically).












9. Oil will begin to pump from the filter pan

into the frypot. Allow the oil to circulate
through the frypot for the remainder of the
timed countdown (approximately 10
minutes). This process is known as
"polishing".








10. The computer will display

FILL at the end

of the timed countdown. Replace the frypot
grid rack. Close the red drain valve handle to
begin refilling the frypot.

















Begin the filtering process by pulling yellow handle
to open oil return valve. Leave the drain valve
(red handle) open during the filtering process.

Polishing the oil removes suspended particles,
which increases the life of the oil.

When the computer displays

FILL, close the

drain valve to begin refilling the frypot.

Advertising